The Charter on the Preservation of Digital Heritage of UNESCO defines digital heritage as embracing "cultural, educational, scientific and administrative resources, as well as technical, legal, medical and other kinds of information created digitally, or converted into digital form from existing analogue resources". Digital heritage also includes the use of digital media in the service of understanding and preserving cultural or natural heritage. The digitization of both cultural heritage and Natural heritage serves to enable the permanent access of current and future generations to culturally important objects ranging from literature and paintings to flora, fauna, or habitats. It is also used in the preservation and access of objects with enduring or significant historical, scientific, or cultural value including buildings, archeological sites, and natural phenomena. The main idea is the transformation of a material object into a virtual copy. It should not be confused with digital humanities, which uses digitizing technology to specifically help with research. There have been several debates concerning the efficiency of the process of digitizing heritage. Some of the drawbacks refer to the deterioration and technological obsolescence due to the lack of funding for archival materials and underdeveloped policies that would regulate such a process. Another main social debate has taken place around the restricted accessibility due to the digital divide that exists around the world. Nevertheless, new technologies enable easy, instant and cross boarder access to the digitized work. Many of these technologies include spatial and surveying technology to gain aerial or 3D images. Digital heritage is also used to monitor cultural heritage sites over years to help with preservation, maintenance, and sustainable tourism. It aims to observe any changes, diseases, or deterioration that may occur on objects. == Cultural and natural heritage == Digital Heritage that is not born-digital can be divided into two separate groups—digital cultural heritage and digital natural heritage. Digital cultural heritage is the maintenance or preservation of cultural objects through digitization. These are objects, in some cases entire cities, that are considered of cultural importance. These objects are sometimes able to be digitized or physically represented in minute detail. Digital cultural heritage also includes intangible heritage. These are things such as "oral traditions, customs, value systems, skills, traditional dances, diets, performances" and other unique features of a culture. Intangible heritage is particularly vulnerable to destruction due to urbanization. There are several projects and programs which concentrate on digital cultural heritage. One such project is Mapping Gothic France, which aims to document and preserve cathedrals across France using images, VR tours, laser scans, and panoramas. This allows for scientific and historical study and preservation of the cathedrals and also provides detailed access to the sites for anyone in the world. The aim of projects like these is to help with the preservation and restoration of cultural objects. After the fire at Notre-Dame de Paris in 2019, digital scans are a major component in the ongoing restoration. Digital natural heritage pertains to objects of natural heritage that are considered of cultural, scientific, or aesthetic importance. Digital heritage in this instance is used not only to grant access to these objects, but to monitor any changes over time, such as with plant or animal habitats. Geographic information systems are a form of technology that is used primarily in the study of natural heritage. Western Australia has one such digital heritage project where they have created a digital repository of native plants important to both the region and the Aboriginal people. This is in order to protect and preserve the important biological heritage of Western Australia. == Educational impact == The digitization of these heritage objects has impacts around the world and across many disciplines. The increase of digital items means that people, especially the youth, are able to learn about new objects and cultures online through various media. They provide viewers with a more in-depth experience with an item or place, instead of just an image. The media is also able to be curated to age- or educational-level appropriateness, making learning easier. Some of the technology used in education, especially in museums, includes mobile apps, virtual reality, social media, and video games. Cultural heritage institutions are using this technology to try to expand access, increase appreciation for these items, and to gain new viewpoints on their collections. Digital heritage also helps scientists, archeologists, or other historians and specialists collect data on these objects, providing more information on the objects and the past. Digital Heritage is still currently being studied and improved by several sectors invested in cultural and intellectual preservation. It is particularly of interest to museums, governments, and academic institutions. Research by these groups are creating new concepts, methodologies, and techniques for the implementation of digital heritage to protect this type of cultural and natural heritage. As new technologies are created, museums and other heritage institutions are provided with more ways of disseminating their information and engaging with the public. A lack of resources within certain groups may still hinder everyone from accessing digital heritage. == Technologies used == The digitization of cultural heritage is attained through several means. Some of the main technology used is spatial and surveying technology. Space archaeological technology - Observations from space satellites are non-intrusive and can be integrated with other technologies on the ground. It is used to photograph vast areas of earth and help with research. Remnants of ancient civilizations or other human objects are also able to be spotted via satellite imaging. Unmanned aerial vehicles - UAV, such as drones, are commonly used in digitization of cultural heritage objects. The Great Wall of China is one such site that has been digitized and analyzed through unmanned aerial vehicle investigation. The resulting images, 3-D scans, maps, and other data are used to evaluate and maintain the Great Wall. Laser Scanning - Laser scanning is used to scan an area and recreate spatially accurate depictions, such as a 3D model. Virtual and Augmented Reality - VR is used primarily for education but does have uses for reconstruction and research. It is used to provide users with an immersive experience, as though they are actually at the site. Geographic Information systems - GIS are used primarily to study objects and sites over time. It is also important in studying the socioeconomic status of the past. 3D Modeling - 3D modeling has become more widely used due to an increase in technology that works specifically with heritage sites. It is often used in tandem with GIS to reconstruct objects for restoration, documentation, preservation, and educational purposes. Data is collected using satellite or other aerial imaging and ground-based imaging. There is some concern about the accuracy and authenticity of these types of digital reconstructions and their effects on the sites themselves. A major barrier to digital heritage is the amount of resources it takes to undertake such projects, such as money, time, and technology. Money and the lack of qualified personnel are two that are considered the most obstructive. This is especially an issue in less developed areas or within underfunded groups such as minorities. == Virtual heritage == A particular branch of digital heritage, known as "virtual heritage", is formed by the use of information technology with the aim of recreating the experience of existing cultural heritage, as in (approximations of) virtual reality. It is hard to differentiate this branch from the core contribution of digital heritage which is storing the heritage data digitally. Parsinejad et al. developed two techniques for Digital Twinning of the architectural assets and representation of the physical assets virtually in the museum context. Two techniques are hand recording and digital recording and both have challenges in adoption and implementation of Digital Twin as a revolutionary concept. == Digital heritage stewardship == Digital heritage stewardship is a form of digital curation which is modeled after collaborative curation. Digital heritage stewardship means stepping away from typical curatorial practices (e.g. discovering, arranging, and sharing information, material, and/or content) in favor of practices which allow its stakeholders the opportunity to contribute historical, political, and social context and culture. The collaborative practice encourages the creation, engagement, and maintena
Slopaganda
Slopaganda is a portmanteau of "AI slop" and "propaganda", referring to AI-generated content designed to manipulate beliefs, emotions, and political decision-making at scale. The term is credited to Michał Klincewicz, an assistant professor in the Department of Computational Cognitive Science at Tilburg University, in 2025. == Definition == Slopaganda is distinguished from traditional propaganda by three features: scale, scope, and speed. Generative AI makes it possible to produce large volumes of content quickly and at low cost, allows for highly personalised and targeted messaging to specific sub-audiences, and leverages the hyper-connectivity of social networks to accelerate dissemination beyond what conventional media could achieve. Unlike traditional propaganda, which delivers a uniform message to all recipients, slopaganda can be micro-targeted — tailored to individuals based on estimated prior beliefs to reinforce political biases or emotional associations. The authors note that it need not aim at literal deception: much slopaganda is expressive rather than truth-apt, designed to create emotional associations rather than false factual beliefs. == Relation to AI slop == Slopaganda is a subset of AI slop — low-quality, mass-produced AI-generated content — distinguished by intent. Where AI slop may be produced indifferently for commercial or engagement-farming purposes, slopaganda is deployed with a deliberate political or ideological goal. == Notable examples == Examples discussed by the term's originators include Donald Trump's prolific use of AI in Truth Social posts and Iranian Lego-themed music videos. AI-generated videos posted by the White House mixing real military footage with clips from films and video games; and deepfake audio imitating political candidates during the 2024 US presidential campaign have also been given the label slopaganda.
Lossless join decomposition
In database design, a lossless join decomposition is a decomposition of a relation r {\displaystyle r} into relations r 1 , r 2 {\displaystyle r_{1},r_{2}} such that a natural join of the two smaller relations yields back the original relation. This is central in removing redundancy safely from databases while preserving the original data. Lossless join can also be called non-additive. == Definition == A relation r {\displaystyle r} on schema R {\displaystyle R} decomposes losslessly onto schemas R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} if π R 1 ( r ) ⋈ π R 2 ( r ) = r {\displaystyle \pi _{R_{1}}(r)\bowtie \pi _{R_{2}}(r)=r} , that is r {\displaystyle r} is the natural join of its projections onto the smaller schemas. A pair ( R 1 , R 2 ) {\displaystyle (R_{1},R_{2})} is a lossless-join decomposition of R {\displaystyle R} or said to have a lossless join with respect to a set of functional dependencies F {\displaystyle F} if any relation r ( R ) {\displaystyle r(R)} that satisfies F {\displaystyle F} decomposes losslessly onto R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} . Decompositions into more than two schemas can be defined in the same way. == Criteria == A decomposition R = R 1 ∪ R 2 {\displaystyle R=R_{1}\cup R_{2}} has a lossless join with respect to F {\displaystyle F} if and only if the closure of R 1 ∩ R 2 {\displaystyle R_{1}\cap R_{2}} includes R 1 ∖ R 2 {\displaystyle R_{1}\setminus R_{2}} or R 2 ∖ R 1 {\displaystyle R_{2}\setminus R_{1}} . In other words, one of the following must hold: ( R 1 ∩ R 2 ) → ( R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{1}\setminus R_{2})\in F^{+}} ( R 1 ∩ R 2 ) → ( R 2 ∖ R 1 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{2}\setminus R_{1})\in F^{+}} === Criteria for multiple sub-schemas === Multiple sub-schemas R 1 , R 2 , . . . , R n {\displaystyle R_{1},R_{2},...,R_{n}} have a lossless join if there is some way in which we can repeatedly perform lossless joins until all the schemas have been joined into a single schema. Once we have a new sub-schema made from a lossless join, we are not allowed to use any of its isolated sub-schema to join with any of the other schemas. For example, if we can do a lossless join on a pair of schemas R i , R j {\displaystyle R_{i},R_{j}} to form a new schema R i , j {\displaystyle R_{i,j}} , we use this new schema (rather than R i {\displaystyle R_{i}} or R j {\displaystyle R_{j}} ) to form a lossless join with another schema R k {\displaystyle R_{k}} (which may already be joined (e.g., R k , l {\displaystyle R_{k,l}} )). == Example == Let R = { A , B , C , D } {\displaystyle R=\{A,B,C,D\}} be the relation schema, with attributes A, B, C and D. Let F = { A → B C } {\displaystyle F=\{A\rightarrow BC\}} be the set of functional dependencies. Decomposition into R 1 = { A , B , C } {\displaystyle R_{1}=\{A,B,C\}} and R 2 = { A , D } {\displaystyle R_{2}=\{A,D\}} is lossless under F because R 1 ∩ R 2 = A {\displaystyle R_{1}\cap R_{2}=A} and we have a functional dependency A → B C {\displaystyle A\rightarrow BC} . In other words, we have proven that ( R 1 ∩ R 2 → R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2}\rightarrow R_{1}\setminus R_{2})\in F^{+}} .
Security type system
In computer science, a type system can be described as a syntactic framework which contains a set of rules that are used to assign a type property (int, boolean, char etc.) to various components of a computer program, such as variables or functions. A security type system works in a similar way, only with a main focus on the security of the computer program, through information flow control. Thus, the various components of the program are assigned security types, or labels. The aim of a such system is to ultimately be able to verify that a given program conforms to the type system rules and satisfies non-interference. Security type systems is one of many security techniques used in the field of language-based security, and is tightly connected to information flow and information flow policies. In simple terms, a security type system can be used to detect if there exists any kind of violation of confidentiality or integrity in a program, i.e. the programmer wants to detect if the program is in line with the information flow policy or not. == A simple information flow policy == Suppose there are two users, A and B. In a program, the following security classes (SC) are introduced: SC = {∅, {A}, {B}, {A,B}}, where ∅ is the empty set. The information flow policy should define the direction that information is allowed to flow, which is dependent on whether the policy allows read or write operations. This example considers read operations (confidentiality). The following flows are allowed: → = {({A}, {A}), ({B}, {B}), ({A,B}, {A,B}), ({A,B}, {A}), ({A,B}, {B}), ({A}, ∅), ({B}, ∅), ({A,B}, ∅)} This can also be described as a superset (⊇). In words: information is allowed to flow towards stricter levels of confidentiality. The combination operator (⊕) can express how security classes can perform read operations with respect to other security classes. For example: {A} ⊕ {A,B} = {A} — the only security class that can read from both {A} and {A,B} is {A}. {A} ⊕ {B} = ∅ — neither {A} nor {B} are allowed to read from both {A} and {B}. This can also be described as an intersection (∩) between security classes. An information flow policy can be illustrated as a Hasse diagram. The policy should also be a lattice, that is, it has a greatest lower-bound and least upper-bound (there always exists a combination between security classes). In the case of integrity, information will flow in the opposite direction, thus the policy will be inverted. == Information flow policy in security type systems == Once the policy is in place, the software developer can apply the security classes to the program components. Use of a security type system is usually combined with a compiler that can perform the verification of the information flow according to the type system rules. For the sake of simplicity, a very simple computer program, together with the information flow policy as described in the previous section, can be used as a demonstration. The simple program is given in the following pseudocode: if y{A} = 1 then x{A,B} := 0 else x{A,B} := 1 Here, an equality check is made on a variable y that is assigned the security class {A}. A variable x with a lower security class ({A,B}) is influenced by this check. This means that information is leaking from class {A} to class {A,B}, which is a violation of the confidentiality policy. This leak should be detected by the security type system. === Example === Designing a security type system requires a function (also known as a security environment) that creates a mapping from variables to security types, or classes. This function can be called Γ, such that Γ(x) = τ, where x is a variable and τ is the security class, or type. Security classes are assigned (also called "judgement") to program components, using the following notation: Types are assigned to read operations by: Γ ⊢ e : τ. Types are assigned to write operations by: Γ ⊢ S : τ cmd. Constants can be assigned any type. The following bottom-up notation can be used to decompose the program: assumption1 ... assumptionn/conclusion. Once the program is decomposed into trivial judgements, by which the type can easily be determined, the types for the less trivial parts of the program can be derived. Each "numerator" is considered in isolation, looking at the type of each statement to see if an allowed type can be derived for the "denominator", based on the defined type system "rules". ==== Rules ==== The main part of the security type system is the rules. They say how the program should be decomposed and how type verification should be performed. This toy program consists of a conditional test and two possible variable assignments. Rules for these two events are defined as follows: Applying this to the simple program introduced above yields: The type system detects the policy violation in line 2, where a read operation of security class {A} is performed, followed by two write operations of a less strict security class {A,B}. In more formalized terms, {A} ⋢ {A,B}, {A,B} (from the rule of the conditional test). Thus, the program is classified as "not typeable". === Soundness === The soundness of a security type system can be informally defined as: If program P is well typed, P satisfies non-interference. Volpano, Smith and Irvine were the first to prove soundness of a security type system for a deterministic imperative programming language with a standard (non-instrumented) semantics using the notion of non-interference.
Digital video effect
Digital video effects (DVEs) are visual effects that provide comprehensive live video image manipulation, in the same form as optical printer effects in film. DVEs differ from standard video switcher effects (often referred to as analog effects) such as wipes or dissolves, in that they deal primarily with resizing, distortion or movement of the image. Modern video switchers often contain internal DVE functionality. Modern DVE devices are incorporated in high-end broadcast video switchers. Early examples of DVE devices found in the broadcast post-production industry include the Ampex Digital Optics (ADO), Quantel DPE-5000, Vital Squeezoom, NEC E-Flex and the Abekas A5x series of DVEs. By 1988, Grass Valley Group caught up with the competition with their Kaleidoscope, which integrated ADO-type effects with their widely used line of broadcast switching gear. DVEs are used by the broadcast television industry in live television production environments like television studios and outside broadcasts. They are commonly used in video post-production.
Spatial anti-aliasing
In digital signal processing, spatial anti-aliasing is a technique for minimizing the distortion artifacts (aliasing) when representing a high-resolution image at a lower resolution. Anti-aliasing is used in digital photography, computer graphics, digital audio, and many other applications. Anti-aliasing means removing signal components that have a higher frequency than is able to be properly resolved by the recording (or sampling) device. This removal is done before (re)sampling at a lower resolution. When sampling is performed without removing this part of the signal, it causes undesirable artifacts such as black-and-white noise. In signal acquisition and audio, anti-aliasing is often done using an analog anti-aliasing filter to remove the out-of-band component of the input signal prior to sampling with an analog-to-digital converter. In digital photography, optical anti-aliasing filters made of birefringent materials smooth the signal in the spatial optical domain. The anti-aliasing filter essentially blurs the image slightly in order to reduce the resolution to or below that achievable by the digital sensor (the larger the pixel pitch, the lower the achievable resolution at the sensor level). == Examples == In computer graphics, anti-aliasing improves the appearance of "jagged" polygon edges, or "jaggies", so they are smoothed out on the screen. However, it incurs a performance cost for the graphics card and uses more video memory. The level of anti-aliasing determines how smooth polygon edges are (and how much video memory it consumes). Near the top of an image with a receding checker-board pattern, the image is difficult to recognise and often not considered aesthetically pleasing. In contrast, when anti-aliased the checker-board near the top blends into grey, which is usually the desired effect when the resolution is insufficient to show the detail. Even near the bottom of the image, the edges appear much smoother in the anti-aliased image. Multiple methods exist, including the sinc filter, which is considered a better anti-aliasing algorithm. When magnified, it can be seen how anti-aliasing interpolates the brightness of the pixels at the boundaries to produce grey pixels since the space is occupied by both black and white tiles. These help make the sinc filter antialiased image appear much smoother than the original. In a simple diamond image, anti-aliasing blends the boundary pixels; this reduces the aesthetically jarring effect of the sharp, step-like boundaries that appear in the aliased graphic. Anti-aliasing is often applied in rendering text on a computer screen, to suggest smooth contours that better emulate the appearance of text produced by conventional ink-and-paper printing. Particularly with fonts displayed on typical LCD screens, it is common to use subpixel rendering techniques like ClearType. Sub-pixel rendering requires special colour-balanced anti-aliasing filters to turn what would be severe colour distortion into barely-noticeable colour fringes. Equivalent results can be had by making individual sub-pixels addressable as if they were full pixels, and supplying a hardware-based anti-aliasing filter as is done in the OLPC XO-1 laptop's display controller. Pixel geometry affects all of this, whether the anti-aliasing and sub-pixel addressing are done in software or hardware. == Simplest approach to anti-aliasing == The most basic approach to anti-aliasing a pixel is determining what percentage of the pixel is occupied by a given region in the vector graphic - in this case a pixel-sized square, possibly transposed over several pixels - and using that percentage as the colour. A Python program producing a basic plot of a single, white-on-black anti-aliased point using the method is as follows: This method is generally best suited for simple graphics, such as basic lines or curves, and applications that would otherwise have to convert absolute coordinates to pixel-constrained coordinates, such as 3D graphics. It is a fairly fast function, but it is relatively low-quality, and gets slower as the complexity of the shape increases. For purposes requiring very high-quality graphics or very complex vector shapes, this will probably not be the best approach. Note: The plot_antialiased_point routine above cannot blindly set the colour value to the percent calculated. It must add the new value to the existing value at that location up to a maximum of 1. Otherwise, the brightness of each pixel will be equal to the darkest value calculated in time for that location which produces a very bad result. For example, if one point sets a brightness level of 0.90 for a given pixel and another point calculated later barely touches that pixel and has a brightness of 0.05, the final value set for that pixel should be 0.95, not 0.05. For more sophisticated shapes, the algorithm may be generalized as rendering the shape to a pixel grid with higher resolution than the target display surface (usually a multiple that is a power of 2 to reduce distortion), then using bicubic interpolation to determine the average intensity of each real pixel on the display surface. == Signal processing approach to anti-aliasing == In this approach, the ideal image is regarded as a signal. The image displayed on the screen is taken as samples, at each (x,y) pixel position, of a filtered version of the signal. Ideally, one would understand how the human brain would process the original signal, and provide an on-screen image that will yield the most similar response by the brain. The most widely accepted analytic tool for such problems is the Fourier transform; this decomposes a signal into basis functions of different frequencies, known as frequency components, and gives us the amplitude of each frequency component in the signal. The waves are of the form: cos ( 2 j π x ) cos ( 2 k π y ) {\displaystyle \ \cos(2j\pi x)\cos(2k\pi y)} where j and k are arbitrary non-negative integers. There are also frequency components involving the sine functions in one or both dimensions, but for the purpose of this discussion, the cosine will suffice. The numbers j and k together are the frequency of the component: j is the frequency in the x direction, and k is the frequency in the y direction. The goal of an anti-aliasing filter is to greatly reduce frequencies above a certain limit, known as the Nyquist frequency, so that the signal will be accurately represented by its samples, or nearly so, in accordance with the sampling theorem; there are many different choices of detailed algorithm, with different filter transfer functions. Current knowledge of human visual perception is not sufficient, in general, to say what approach will look best. == Two dimensional considerations == The previous discussion assumes that the rectangular mesh sampling is the dominant part of the problem. The filter usually considered optimal is not rotationally symmetrical, as shown in this first figure; this is because the data is sampled on a square lattice, not using a continuous image. This sampling pattern is the justification for doing signal processing along each axis, as it is traditionally done on one dimensional data. Lanczos resampling is based on convolution of the data with a discrete representation of the sinc function. If the resolution is not limited by the rectangular sampling rate of either the source or target image, then one should ideally use rotationally symmetrical filter or interpolation functions, as though the data were a two dimensional function of continuous x and y. The sinc function of the radius has too long a tail to make a good filter (it is not even square-integrable). A more appropriate analog to the one-dimensional sinc is the two-dimensional Airy disc amplitude, the 2D Fourier transform of a circular region in 2D frequency space, as opposed to a square region. One might consider a Gaussian plus enough of its second derivative to flatten the top (in the frequency domain) or sharpen it up (in the spatial domain), as shown. Functions based on the Gaussian function are natural choices, because convolution with a Gaussian gives another Gaussian whether applied to x and y or to the radius. Similarly to wavelets, another of its properties is that it is halfway between being localized in the configuration (x and y) and in the spectral (j and k) representation. As an interpolation function, a Gaussian alone seems too spread out to preserve the maximum possible detail, and thus the second derivative is added. As an example, when printing a photographic negative with plentiful processing capability and on a printer with a hexagonal pattern, there is no reason to use sinc function interpolation. Such interpolation would treat diagonal lines differently from horizontal and vertical lines, which is like a weak form of aliasing. == Practical real-time anti-aliasing approximations == There are only a handful of primitives used at the lowest level in a real-time rend
National Cyber Security Policy 2013
National Cyber Security Policy is a policy framework by Department of Electronics and Information Technology (DeitY) It aims at protecting the public and private infrastructure from cyber attacks. The policy also intends to safeguard "information, such as personal information (of web users), financial and banking information and sovereign data". This was particularly relevant in the wake of US National Security Agency (NSA) leaks that suggested the US government agencies are spying on Indian users, who have no legal or technical safeguards against it. Ministry of Communications and Information Technology (India) defines Cyberspace as a complex environment consisting of interactions between people, software services supported by worldwide distribution of information and communication technology. == Reason for Cyber Security policies == India had no Cyber security policy before 2013. In 2013, The Hindu newspaper, citing documents leaked by NSA whistle-blower Edward Snowden, has alleged that much of the NSA surveillance was focused on India's domestic politics and its strategic and commercial interests. This sparked a furore among people. Under pressure, the government unveiled a National Cyber Security Policy 2013 on 2 July 2013. == Vision == To build a secure and resilient cyberspace for citizens, business, and government and also to protect anyone from intervening in user's privacy.It mentioned a five year target of training five lakh cyber security personnel by 2018. == Mission == To protect information and information infrastructure in cyberspace, build capabilities to prevent and respond to cyber threat, reduce vulnerabilities and minimize damage from cyber incidents through a combination of institutional structures, people, processes, technology, and cooperation. == Objective == Ministry of Communications and Information Technology (India) define objectives as follows: To create a secure cyber ecosystem in the country, generate adequate trust and confidence in IT system and transactions in cyberspace and thereby enhance adoption of IT in all sectors of the economy. To create an assurance framework for the design of security policies and promotion and enabling actions for compliance to global security standards and best practices by way of conformity assessment (Product, process, technology & people). To strengthen the Regulatory Framework for ensuring a SECURE CYBERSPACE ECOSYSTEM. To enhance and create National and Sectoral level 24x7 mechanism for obtaining strategic information regarding threats to ICT infrastructure, creating scenarios for response, resolution and crisis management through effective predictive, preventive, protective response and recovery actions. -To improve visibility of integrity of ICT products and services by establishing infrastructure for testing & validation of security of such product. To create workforce for 500,000 professionals skilled in next 5 years through capacity building skill development and training. To provide fiscal benefit to businesses for adoption of standard security practices and processes. To enable Protection of information while in process, handling, storage & transit so as to safeguard privacy of citizen's data and reducing economic losses due to cyber crime or data theft. To enable effective prevention, investigation and prosecution of cybercrime and enhancement of law enforcement capabilities through appropriate legislative intervention. == Strategies == Creating a secured Ecosystem. Creating an assurance framework. Encouraging Open Standards. Strengthening The regulatory Framework. Creating a mechanism for Security Threats Early Warning, Vulnerability management, and response to security threats. Securing E-Governance services. Protection and resilience of Critical Information Infrastructure. Promotion of Research and Development in cyber security. Reducing supply chain risks Human Resource Development (fostering education and training programs both in formal and informal sectors to Support the Nation's cyber security needs and build capacity. Creating cyber security awareness. Developing effective Public-Private partnerships. To develop bilateral and multilateral relationships in the area of cyber security with another country. (Information sharing and cooperation) a Prioritized approach for implementation.